0478-404-9604-A
72
English
15 Cleaning
► Fold down the upper handlebar.
► Store the tiller in accordance with the following conditions:
– The tiller is on a level surface resting on the front wheel,
hoes and blade spur.
– The tiller is out of reach of children.
– The tiller is clean and dry.
If the tiller is to be stored for more than three months:
► Remove the hoes.
► Open the fuel tank cap.
► Empty the fuel tank.
► Seal the fuel tank.
► Have the fuel tank cleaned by a STIHL specialist dealer.
► Start the engine and leave it idling until it cuts out.
15.1 Cleaning the Tiller
► Stop the engine.
► Allow the tiller to cool down.
► Clean the tiller with a damp cloth or STIHL resin solvent.
► Clean the ventilation slots with a paintbrush.
► Spray the drive shaft with STIHL multispray.
15.2 Cleaning the Hoes
► Stop the engine.
► Allow the tiller to cool down.
► Set the handlebar to the lowest level.
► Place the front wheel in the operating position.
► Detach retaining pin (1) and remove pin (2).
► Remove the blade spur together with adapter (3).
► Rest the tiller on the handlebar.
16.1 Maintenance Intervals
Maintenance intervals are dependent on the ambient
conditions and the working conditions. STIHL recommends
the following maintenance intervals:
15 Cleaning
16 Maintenance
To Next Page
Loading...
