Stihl MS 18 - Starting the 1130 Saw: Fuel and Oil; Fuel Mixture Requirements; Starting the 1130 Saw: Controls; Throttle and Interlock Operation

© STIHL Inc., Virginia Beach, VA 2013 US/STR
confidential
Starting the 1130 Saw
 Fill the tank with 89
octane brand name fuel
with STIHL two-stroke oil
mixed at a 50:1 ratio, or
use STIHL MotoMix
 Add bar oil to the oil tank
for chain lubrication
© STIHL Inc., Virginia Beach, VA 2013 US/STR
confidential
Starting the 1130 Saw
Push down on the interlock
on the top of the handle and
then squeeze the throttle all
the way open and hold it
Place the Master Control
Lever™ in the full choke
position, down to the #1
position
11