© STIHL Inc., Virginia Beach, VA 2013 US/STR
confidential
6. Verify Anti-vibration Components
Hold the bumper spike
against the edge of the
workbench and put
pressure against the
handle assemble
There should be strong
resistance to movement
but there should be
some “give” to the anti-
vibe rubber bushings
There should not be any
looseness to the handle
assembly
© STIHL Inc., Virginia Beach, VA 2013 US/STR
confidential
7. Inspect Starter System
Inspect rope, handle, and eyelet for wear or damage
Pull the rope to it’s full extended length and be sure it is
not about to break at the very end
To Next Page
Loading...
Need help?
General
