Stihl MS 194 C - Operating Instructions; Break-in Period and Work Practices

MS 194 C
English
38
Starting the Saw
WARNING
Bystanders must be well clear of the
general work area of the saw.
N Press the manual fuel pump bulb at
least ten times – even if the bulb is
already filled with fuel.
N Push the hand guard forward – the
chain is locked.
N Press down the trigger lockout (1)
and pull the throttle trigger (2) at the
same time. Set Master Control
lever (3) to starting throttle
position (n).
N Set choke lever to required position.
Choke shutter closed (l)
– if the engine is cold (also use this
position if the engine stopped when
you opened the throttle after
starting)
Choke shutter open (j)
– if the engine is warm, i.e. if it has
been running for about one minute.
N Hold and start your saw as
described.
When engine begins to fire
N Move the choke lever (4) to the
open position (j).
N Hold and start your saw as
described.
418BA001 KN
151BA004 KN
1
2
3
418BA002 KN
418BA003 KN
4
4
418BA004 KN
4
418BA004 KN