MS 194 C
English
42
The air filter system can be adapted to
suit different operating conditions by
installing different filters. Changing a
filter is accomplished quickly and simply.
The saw comes standard with either a
fabric filter or a fleece filter.
Fleece filter
For normal operating conditions and dry
work areas.
Fabric filter
For extremely cold operating conditions
(e.g. in powder or drifting snow or frost).
Dirty air filters reduce engine power,
increase fuel consumption and make
starting more difficult.
If there is a noticeable loss of engine
power
N Move the Master Control lever (1) to
F.
N Open the twist lock (2) in the
direction of the arrow.
N Remove the filter cover (3).
N Clean away loose dirt from around
the filter.
N Remove the filter.
N Knock out the filter or blow it clear
with compressed air from the inside
outwards.
N Always replace damaged filters.
If filter is caked with dirt:
N Wash the filter with STIHL universal
cleaner or in a clean, non-
flammable solution (e.g. warm
soapy water) and then dry.
NOTICE
Do not use a brush to clean the fleece
filter.
N Place the filter (4) in position.
N Fit the filter cover.
Air Filter System Cleaning the Air Filter
To Next Page
Loading...
