0458-786-0121-A
41
English
18 Troubleshooting
WARNING
Unconfined sparks may occur if the starter grip is pulled after
the spark plug boot has been removed. Sparks may cause a
fire or an explosion in an easily combustible or explosive
environment. This can result in serious or fatal injuries and
damage to property.
► Move the Master Control lever to position and hold it
there before pulling the starter grip.
► Move the Master Control lever to position and hold it
there.
► Pull the starter grip (3) and guide it back several times.
The combustion chamber is cleared.
► Insert and tighten down the spark plug.
► Connect the spark plug boot (3) and press it down firmly.
► Place the shroud (2) in position.
► Rotate the shroud fasteners (1) clockwise until you hear a
click.
The shroud fasteners are locked.
0000-GXX-5806-A0
3
To Next Page
Loading...
