Why has the shape of the water jet changed on my Stihl RE 110 Pressure Washer?
If the shape of the water jet has changed on your Stihl pressure washer, the nozzle is likely blocked. Clean the nozzle to restore the proper water jet shape.
How to fix a Stihl RE 110 that hums but doesn't start?
If your Stihl Pressure Washer does not start and the electric motor hums, it could be due to a few reasons. One possibility is that the mains voltage is too low. To address this, squeeze and hold the spray gun trigger while switching on the pressure washer, and switch off other loads connected to the same circuit. Additionally, ensure that you are using an extension cord with an adequate cross-section and correct length.
Why is the pressure fluctuating on my Stihl RE 110 Pressure Washer?
If the working pressure of your Stihl Pressure Washer fluctuates or drops, here are some things to check: * Ensure that the water tap is fully open and that a sufficient quantity of water is available. * Clean the nozzle, as it may be blocked. * Inspect and clean the water intake screen and water filter, as they may also be blocked. If these steps don't resolve the issue, the high-pressure pump, high-pressure hose, or spray attachment may be leaking or faulty, and should be inspected by a STIHL servicing dealer.
Why did the water jet shape change on my Stihl RE 110 Pressure Washer?
If the shape of the water jet from your Stihl Pressure Washer has changed, it is likely due to a blocked or worn nozzle. First, try cleaning the nozzle. If cleaning doesn't restore the correct water jet shape, the nozzle may be worn and need replacement.
How to loosen stiff connections on my Stihl RE 110?
If the connections with your Stihl Pressure Washer, high-pressure hose, spray gun, or spray lance are stiff, it's likely that the gaskets of the connections haven't been greased. Apply grease to the gaskets to resolve this issue.
General| Form factor | Upright |
|---|---|
| Hose length | 7 m |
| Cable length | 5 m |
| Power source | Electric |
| Product color | Black, Orange |
| Pump material | Aluminum |
| Detergent tank | - |
| Maximum flow rate | 440 l/h |
| Minimum flow rate | 380 l/h |
| Sound power level | 81 dB |
| Vibration emission | 1.8 m/s² |
| Working pressure (max) | 120 bar |
| Working pressure (min) | 110 bar |
| Maximum water temperature | 40 °C |
| AC input voltage | 230 V |
| Power consumption (typical) | - W |
Weight and Dimensions| Weight | 17600 g |
|---|
Provides essential general safety precautions for operating electric pressure washers.
Specifies necessary PPE like eye protection, gloves, and footwear for safe operation.
Covers safety procedures and considerations for the actual operation of the pressure washer.
Explains safety signal words used in the manual for hazard communication.
Identifies and describes the main components of the pressure washer unit.
Illustrates and explains safety symbols found on the pressure washer itself.
Defines the specific applications and intended use of the pressure washer.
Details safety precautions regarding the power supply cord and plug.
Lists steps and safety checks to perform before starting to use the pressure washer.
Provides instructions on how to hold and control the pressure washer safely during operation.
Presents a chart detailing inspection and maintenance intervals for the machine.
Lists essential steps for preparing the pressure washer before each use.
Provides instructions for assembling the main parts and accessories of the pressure washer.
Explains how to connect and disconnect the high-pressure hose.
Guides on how to safely connect the pressure washer to the main water supply.
Explains the procedure for safely turning the pressure washer on.
Details how to operate and secure the spray gun trigger during use.
Outlines the steps to prepare the pressure washer for transport or storage.
Provides instructions on protecting the pressure washer from freezing temperatures.
Provides instructions on how to safely transport the pressure washer.
Details how to clean the high-pressure nozzle and spray lance if clogged.
Guides on how to clean the water intake screen to ensure proper water flow.
Lists common problems and their solutions for the pressure washer.
Provides technical specifications for the STIHL RE 110 model.
Recommends using genuine STIHL replacement parts for maintenance and repair.
Advises on the environmentally friendly disposal of the pressure washer.
To Next Page
