Stihl RE 130 PLUS - Protecting the Pressure Washer in Winter; Conditions

0458-624-8221-A
27
English 12 After Finishing Work
► Clean the pressure washer.
► Turn the bracket (1) upwards.
► Roll up the power supply cord (2) and hang it onto the
brackets (1).
► Secure the power supply cord with the clip (3).
► Insert the fan-jet nozzle (4) and rotary-jet nozzle (5).
► Insert the detergent spray set (6).
► Roll up the high-pressure hose (7) evenly.
► Place the spray attachment in one of the holders (8).
12.2 Protecting the Pressure Washer in Winter
Conditions
Removing Water from the System
To remove any remaining water from the system:
► Switch off the pressure washer, @ 10.2.
► Disconnect the pressure washer from the power supply.
► Shut off the water supply.
► Relieve system pressure.
► Remove the spray gun and lance, @ 8.3.2.
► Disconnect the water hose, @ 9.1.
1
3
2
4
0000-GXX-7819-A0
5
0000-GXX-7020-A0
6
7
0000-GXX-4630-A1
8
8
8
8
0000-GXX-7825-A0
8