RE 271, RE 271 PLUS, RE 281, RE 281 PLUS
English
39
Various accessory parts must be
mounted on the machines before
starting for the first time.
N Push the holder (1) down into the
support on the frame
N Attach the connector (2) to the
water inlet by hand and tighten it
N Push the detergent tank into the
opening and push the handle down
against the frame until it engages
N Screw the cap with the intake hose
onto the detergent tank
Machines with hose reel
N Engage crank handle in hose reel
N Pull back and hold the coupling (1)
N Push the spray lance (2) into the
mount on the spray gun, or pull it out
to remove the spray gun,
respectively
N Release the coupling (1)
Assembling the Unit
Fitting, removing spray lance