Stihl TS 420 Original Instruction Manual

Working safely with cut-off machines
English
17
Antivibration elements
test, check XXX
Have them replaced by a specialist
dealer
1)
X
Abrasive wheel
test, check XX
Replace XX
Supports/rubber buffers (underneath the
machine)
test, check X
Replace XX
Safety information sticker Replace X
1)
STIHL recommends STIHL servicing dealers
2)
present only in some countries
The following maintenance intervals apply in normal operating conditions. The
specified intervals must be shortened accordingly when working for longer than
normal or under difficult cutting conditions (extensive dust, etc.).
before starting work at the end of work and/or daily Whenever tank is refilled Weekly Monthly Yearly If faulty If damaged As required

Stihl TS 420 Specifications

General

Engine Power	4.4 bhp
Weight	21.2 lbs
Arbor Size	20 mm
Maximum Wheel Size	350 mm
Maximum Cutting Depth	125 mm
Displacement	66.7 cc (4.1 cu. in.)
Fuel Capacity	710 cc