3 Knowledge of the Truck
Technical description
Technical description
The trucks described in this manual ECU 14,
ECU 16, ECU 18 and ECU 20 are designed
to move and stack pallets inside shops,
warehouses and factories.
General characteristics
• The traction motor operates the drive wheel
using a reduction gear unit
• Three-phase traction moto
r
• Starting and accelerating without jerking
• Regenerative braking
Lift
Nominal load:
• 1400 kg (ECU 14)
• 1600 kg (ECU 16)
• 1800 kg (ECU 18)
• 2000 kg (ECU 20)
Pump unit:
• Power 1 kW
Other lifting features:
• Fork lift limit using electric timer that
switches off the pump motor
Guidance
The operator guides
the truck from the ground.
A long and ergonomic
tiller allows the operator
to guide the truck ea
sily.
The tiller is used t
o activate the following
controls:
• Steering
• Drive control throttle
•Horn
• Fork lifting and lowering buttons
• Anti-crush safety button
• Truck braking whe
n the tiller reaches the
upper end positio
n and lower end position
For safety reasons, the tiller automatically
returns to the vertical position when released.
22
45588043482 EN - 04/2016
To Next Page
Loading...
