Use and Operation 4
Use of the truck
• Test that the electromagnetic brake works
effectively.
• Check that the battery harness is in good
condition.
• Check and test the battery electrolyte level
and density as indicated in the battery
instructions.
• The operator must be qualified to drive the
truck. The operator must be able to reach
the controls and operate them (especially
theanti-crushprotectivedevice). Donot
obstruct access to the controls.
Use of the truck
1
OM1774
Stopping the truck in an emergency
In case of emergency, take hold of the battery
plug (1) and, pulling upwards, remove it from
the battery socket.
This blocks all of the fo
rklift functions; the
forklift will brake and
stop.
45
588043482 EN - 04/2016 47
To Next Page
Loading...
