Use and Operation 4
Use of the truck
Starting the truck
Carry out all of the daily checks to be per-
formed by the operator.
Pull the emergency shutdown handle.
Put the tiller in the vertical
position.
To start the truck, turn the switch key to the
position I. If the truck has a numeric keypad
rather than a key, insert the appropriate PIN
code.
Check the battery charge status on the
indicator and replace or charge the battery
if necessary.
1
A
B
3
OM1776
Truck operation
• Grip the tiller head correctly
• Tilt the tiller in the wo
rking position (1).
• Select the desired direction of travel (A) or
(B) use the throttle (3); the forklift speed is
proportional to the angular position of the
throttle(3).
CAUTION
If there are difficulties starting the truck, do not
persist but look for the cause.
45
588043482 EN - 04/2016 49
To Next Page
Loading...
