5 Servicing
General Information
General Information
To keep your forklift in good condition, carry
out the servicing indicated regularly, within the
times indicated and using the consumption
materials provided for that purpose, as speci-
fied on the following pages. Please make sure
that you keep a record of work done; this is the
only way for the guarantee to remain valid.
Maintenance is divided into:
• scheduled (to be done by the service
network authorised by the manufacturer)
• as required (done by the user
)
DANGER
Scheduled maintenance and repairs must be
done by the service network authorised by the
manufacturer in order to maintain the machine
in perfect condition and compliant with technical
specifications.
NOTE
Contact the authorised service network for
a maintenance contract appropriate to your
forklift.
CAUTION
Maintenance intervals are defined for standard use.
In the following cases, it is necessary to reduce the
interval between the various scheduled mainten-
ance operations: in the event of use in dusty of salty
environments, extremely high or low ambient tem-
peratures, high levels of air humidity, particularly
intense and heavy uses, specific national regulati-
ons for trucks or individual components.
Preliminary maintenance operations
Do the following before performing mainte-
nance operations:
• Position the forklift on a flat surface and
ensure that it cannot move accidentally.
• Lower the forks fully.
•Turnoffthetruck.
DANGER
Disconnect the power terminal from the battery be-
fore performing any work on the electrical system.
72
45588043482 EN - 04/2016
To Next Page
