Maintenance - 1000 hours
At operating hours
1.000
2.000
4.000
5.000
7.000
8.000
11.000
13.000
14.000
Carried
out
Note
▲
= Every 1000 hours or at least every 12 months (whichever comes first), unless
local regulations require more frequent intervention.
Drive
Reduction gear: check that it is correctly mounted
Reduction gear: check for any oil leakage
Drive motor: check that it is correctly mounted
Forks
Check condition of forks
Grease the rods and levers (if present)
Grease the fork opening and closing system and check that it is working correctly
(for LTX-FF only)
Check bushes and levers
Steering
Steering: check the mounting of the steering wheel "cockpit"
Steering: check that the steering system operates correctly
Steering: grease the two steering wheel travel controls
Steering: check that the "cockpit" steering wheel adjustment system is properly
mounted and that it operates correctly (if present)
Wheels
Wheels and rollers: check for any damage, foreign matter or signs of wear
Wheels: check that they are at the correct tightness
Rollers: check that they are correctly mounted
Hydraulic pivot wheels: check the oil level and check that the wheels operate cor-
rectly (where present)
Pivot wheels: check and adjust the pivot wheels (for LTX only)
Load rollers: Grease using the specific grease nipples (for LTX only)
Brake
Electromagnetic brake: check for signs of wear and any adjustment
Check that the various braking operations of the truck are operating correctly
Maintenance
5
Maintenance - 1000 hours
19145878043344 EN - 11/2021 - 12
To Next Page
Loading...
