Other Useful Information
When to Clean
Initially check the dustbin, filters, mop pad, brushes and wheels once a week to
see the impact of your use. For example if you have a pet that sheds you may
have to clean every couple of days. You will be able to determine this yourself.
You should not allow the dustbin to get very full as is will diminish the productivity
of your robot vacuum cleaner, and may cause damage.
Cleaning the Dustbin, and HEPA Filter
1. Extract the dustbin by pressing
the dustbin release key on top of
the vacuum
(Refer Fig. 1 and Fig. 2).
2. Empty the dust from the dustbin,
and then clean the inside with the
dust brush supplied (Refer Fig. 3).
3. Press the air outlet release key
and the air outlet will pop out
automatically (Refer Fig. 4).
CAUTION:
Don’t clean the air outlet unit in water!
4. With the air outlet unit removed, clean
the air inlet/outlet with the dust brush
(Refer Fig. 5).
5(a). Release the HEPA dust filter bracket
to slide it open by pulling the semi-
circulor tab on the bracket with one
hand while pulling the fastener down
with the other hand (Refer Fig. 6).
5(b). Take out the HEPA dust filter by inserting
your thumb in the space between the filter
and bracket and pulling the HEPA dust
filter up out of the bracket. Clean the
dustbin in water (Refer Fig. 7).
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 1 Fig. 2
23
AFTER SALES SUPPORT
MODEL: EE-9248 PRODUCT CODE: 49631 06/2015
1800 898 750
AUS
service@wkfe.com.hk
To Next Page
Loading...
