Before First Use
• Read: The best way to familiarise yourself with all the parts and operating
principles of your new electric oven is to read this manual. Pay particular
attention to the safety instructions on pages 5–7. Refer to pages 8–9 for a
picture and list of all parts and buttons.
• Initial use: After the appliance has been properly installed, and before rst
use, you should burn off any dust, oil or other remnants that may have
been left from the manufacturing process or transport.
First set the oven to manual operation mode (see opposite for instructions).
Then set the oven function to the “Intensive Bake” setting (see page 23)
and the thermostat to 250°C. The two control dials just need to be pushed
in slightly, they will then pop out and reveal the available function options or
temperature settings.
Leave the oven on for 30–40 minutes. We recommend you leave the
room during this burning off process. However, any smoke and odour
development during this initial use is normal and completely harmless;
ensure good ventilation.
• Clean: After the oven cavity has cooled, wipe the interior oven surfaces
with a soft cloth dampened with warm water and a little mild detergent. Do
not use abrasive cleaners.
• Wash: Remove and wash the oven rack and baking/drip tray with warm
water and a little washing-up liquid. Dry and return to the oven. Leave the
oven door open until it is completely dry.
CAUTION!
Take care to avoid burns, the oven becomes very hot during use.
Getting Started
To Next Page
Loading...
