Replacing the Oven Light Bulb
IMPORTANT!
To avoid the possibility of electric shock, make sure all oven controls are switched
off before attempting to remove or replace the oven light bulb.
Other Useful Information (Cont.)
When the lamp in the oven fails and needs replacement, proceed as follows
(Fig. 16). (Bulb replacement is not covered by warranty.)
• Unscrew the protective lamp cover anticlockwise.
• Unscrew the bulb anticlockwise and carefully remove it from its holder.
• Replace the bulb with a new one of the same size and wattage (25W,
300°C, screw type pigmy). Do not use any other type of bulb.
• Screw the lamp cover back into position and then restore power to the
appliance.
Fig.16
Other Repairs or Service Inspections
Besides keeping the oven clean, regularly inspect the control dials and
heating elements. In case of damage, or if you experience any problems
with the appliance, contact our after sales support line to arrange a technical
inspection of the oven and x any operational faults. Do not attempt to
carry out any repairs yourself!
To Next Page
Loading...
