Instructions (Cont.)
(c) Cooking End Time
This function is similar to the Cooking Duration function. However, instead
of setting the period of time that you wish the oven to remain on before
switching off, you select the point of time (the time of day) at which you wish
the oven to switch off automatically. The maximum end time that can be set is
10 hours into the future. Oven temperature and function must have been set.
• Press the MANUAL [ M ] button three times. The Automatic Mode symbol
[AUTO] will start ashing and the display will show the clock time.
• Use the PLUS [ + ] and MINUS [ - ] buttons to set the desired cooking end
time. Once your set time appears on the display, release the PLUS [+ ] and
MINUS [ - ] buttons and wait for 5 seconds. [AUTO] will stop ashing and
the LED display will show the clock time again: the timer is now set.
• When the set cooking end time is reached, the oven will turn off auto-
matically and an alarm will sound.
• To turn off the alarm, press any button. Or the alarm will be turned off
automatically after 7 minutes and [AUTO] will disappear.
• If you have nished cooking, turn the oven function selector dial and
thermostat control dial to their OFF [ 0 ] positions.
• To check the cooking end time after the timer is set, press the MANUAL
[M ] button three times: the screen will display the time left.
• To readjust the timer, press the MANUAL [ M ] button three times and
then follow the above steps.
• To terminate the timer, press the MANUAL [ M ] button three times: the
screen will display the set time. Press the MINUS [ - ] button, repeatedly
until [ 00·00] is shown on the display, then release the button and wait for
5 seconds. The Automatic Mode symbol [AUTO] will disappear.
IMPORTANT!
Always return the thermostat control and oven function dials to their OFF [ 0]
positions when you have finished cooking.
To Next Page
Loading...
