Power Cord Summary
Electrical Power Planning 2-13
Power Cord Summary
Stratus supplies tested and approved AC power cords for the following components:
ftServer systems and peripheral components
PDUs
Place all power cords out of the way of foot traffic.
Power cords described as Domestic are made with American Wire Gauge (AWG)
cordage and are intended for use in North America. Refer to UL 62 and CSA C22.2,
No. 49. All other power cords are made with International cordage and are intended for
use in the specified countries, and other countries that use that standard.
Power Cords for ftServer Systems and Peripheral Components
Table 2 -11 lists the available power cords that connect ftServer systems and peripheral
components directly to an AC power source (not to a PDU or to a UPS).
Table 2 -1 2 lists the available power cords that connect ftServer systems to qualified
UPS models from APC.
Table 2-11. Power Cords - ftServer Systems and Peripheral Components to AC Power
Marketing ID Plug Type Rating Length Locale
B50101F NEMA 5-15, UL/CSA
approved
15A/127V 7 ft North America (Domestic)
B50104F NEMA 5-15, UL/CSA
approved
15A/127V 15 ft North America (Domestic)
B50112F CEE 7 VII 16A/250V 4.5m Europe (Continental)
B50116F BS 1363/A, 13A/250V 4.5m United Kingdom
B50124F AS/NZS 3112:1993 10A/250V 4.5m Australia
B50140F SEV 1011-S24507 10A/250V 4.5m Switzerland
B50152F SABS164-1:1992 ZA/3 13A/250V 4.5m South Africa/India
B50153F IEC 60309, TUV
approved
16A/250V 4.5m International, locking power
cord
B50160F NEMA 5-15, PSE
approved
15A/127V 15 ft Japan (100V applications)
To Next Page
Loading...
