5
4
6
7
Quick Start Guide
Display when STREETEC autoleveling has
successfully connected to the smartphone.
Connection with the smartphone
Bluetooth must be activated on the smartphone.
This point can be skipped.
→ Continue with point 6!
Updating the software via the smartphone is not
possible in this case.
However, the connection can of course be made
at a later time via the smartphone app.
Query before the calibration process starts. If
the prerequisites are met, the calibration can be
started.
This point can be skipped (continue with point
11), but automatic height and pressure control is
then not possible. Of course, the calibration can
still be carried out at a later time via the settings.
Selection of whether height sensors are installed.
Quick Start Guide
52 53
To Next Page