9
8
10
11
Quick Start Guide
The calibration of the STREETEC autoleveling
goes through 16 steps in which the vehicle
moves..
The vehicle must not be driven, rolled or loaded
during calibration.
CAUTION: Risk of injury!
Selection of the installed pressure sensor. Display when calibration has been successfully
completed.
Query whether the vehicle with STREETEC
autoleveling is used by different people.
In this case, individual settings and travel heights
can be saved for up to 3 people.
This point can be skipped.
→ Continue with point 13!
Of course, additional users can still be added at
a later time via the settings.
Quick Start Guide
54 55
To Next Page
Loading...