Strobel VEB100-1 - 2 General Notes; Operating Instructions; Class Designations, Machine Number and Initial Basis for Descriptions; Applications of the Machine

7 BA_VEB100-1-2-2W-4-5_A3-1_180615_en
2
2.1
General notes
Every person in charge of setting up, operating, servicing and repairing the
machine must first read and understand the operating instructions and
particularly the safety instructions before starting up the machine.
Operating instructions
2.2
The operating side of the machine is the initial basis for left/right descriptions.
Class designations, machine number and initial basis for
descriptions
The class designation (type) and machine/model numbers are fastened to the
rear of the machine case.
2.3
Class VEB100-1 are mainly suitable for blind stitching thin woven and knitted
fabrics.
Applications of the machine
Class VEB100-2 are universal hemming machines for thin and medium weight
material with cross seams.
Class VEB100-2W is suitable for attaching waistbands linings on trousers, also
for waistbands with already closed belt loops attached.
Class VEB100-4 serves specifically for uniform, delicate rolling and sewing of
the edges on skirts, dresses, blouses, silk scarves, pochettes, etc. made of
thinnest, thin and medium fabrics.
The roll seam width can be varied by exchanging the seamer size.
Class VEB100-5 is suitable for attaching the folded side back and centre back
seams of half-lined sack coats. 6 different folder sizes are available.
Exchanging the variable sewing tools, i.e., can extend the range of applications
of the different machines that other fabric qualities than the above mentioned
ones could be sewn as well.
Variable sewing tools please see point 7.