Strobel VEB100-1 - 6 Servicing the Machine; 7 Variable Sewing Tools

41 BA_VEB100-1-2-2W-4-5_A3-1_180615_en
6
The machine is mostly equipped with maintenance free bearings and bushings.
The areas and oil holes marked in red should be re-oiled after 20 operating
hours or at the very latest once per week. One drop of sewing machine oil is
sufficient.
Servicing the machine
To oil looper drive and the feed dog crank, remove the the cover from the head.
Any fabric fibres that collects in the moving parts must be removed on a regular
basis.
7 Variable sewing tools
Attention!
Switch off machine electrically and confirm that the machine
is really in standstill position by operating the treadle for the
motor control.
Otherwise danger of finger bruises and needle through
stitches.
The following chart shows all sewing tools available.