Strobel VEB100-1 User Manual

44 MA_VEB100-2-4-5_A5-3_230123_en.doc
4.3 Setting the parameters
4.3.1 General
Legend:
E = level / t= technician level; K= category of parameters; P= subcategory
E
K
P
Min
Max
Default
Unit
Description
Fig. 26
The following explains how to change the parameters with the DAC control unit.
- Press and hold the "P" key and the "Reset" key simultaneously and switch on the
control unit.
- Press the "A+" key and t 00 00 appears on the display.
- Now we are in the technician level.
- Now, by pressing the B +/- and D +/- keys, the desired categories and the
corresponding subcategories can be called up and the parameters can be set.
- As soon as the desired parameter is selected and confirmed with the OK key, the
values of the parameter can be changed with the B +/- , C +/- and D +/- keys.

Strobel VEB100-1 Specifications

General

Brand	Strobel
Model	VEB100-1
Category	Sewing Machine
Language	English