Strong PrimaSat II User Manual

PART 1 • English
1
English
STRONG declares that this item complies with the basic requirements and other relevant regulations
of directives CE 2004/108/EC and 73/23EC; RoHS 2002/95/EC
Subject to alterations. In consequence of continuous research and development technical
specifications, design and appearance of products may change. All product names are trademarks or
registered trademarks of their respective owners.
© STRONG 2011. All rights reserved.
TABLE OF CONTENTS
1.0 INTRODUCTION 2
1.1 Safety Instructions 2
1.2 Storage 2
1.3 Equipment Set-up 3
1.4 Accessories 3
1.5 Usage of external USB devices 3
2.0 YOUR RECEIVER 3
2.1 Front Panel 3
2.2 Rear Panel 3
2.3 Remote Control Unit 4
2.4 Default PIN code: 0000 4
2.5 Installing the Batteries 4
2.6 Using the Remote Control 5
3.0 CONNECTIONS 5
3.1 Basic connection with SCART cable 5
3.2 Connecting to Satellite Dish 5
3.3 Connecting to a Digital Audio Amplifier 5
3.4 Connecting to USB device 5
4.0 FIRST TIME INSTALLATION 5
4.1 OSD Settings 5
4.2 My Dish 6
5.0 MAIN MENU 7
5.1 TV 8
5.2 Radio 9
5.3 Accessory 9
5.4 Configuration 10
6.0 CHANGING CHANNEL LIST MODE 13
7.0 AUDIO LANGUAGE SELECTION 13
8.0 TELETEXT 13
9.0 SUBTITLES 13
10.0 TROUBLE SHOOTING 14
11.0 SPECIFICATIONS 15
16 Jan 2012 16:12

Strong PrimaSat II Specifications

Demodulator

modulation	QPSK
input symbol rate	2~45 Ms/s

Video Decoder

profile level	MPEG-2 MP@ML
input rate	Max. 60 Mbits/s
video resolution	720 x 576 pixels (PAL), 720 x 480 pixels (NTSC)

Audio Decoder

sampling rate	32, 44.1, 48 kHz
audio modes	Stereo, Dual mono, Mono

Tuner

input frequency range	950~2150 MHz
rf input level	-25 ~ -65 dBm
lnb power	13/18 V DC (± 5%) max. 500 mA, Overload protected

System and Memory

flash memory	16 Mb
sdram	64 Mb

General Data

input voltage range	100 - 240 V AC 50/60 Hz
power consumption	max 18 W, typ. 4.6 W
size	179 x 130 x 44 mm