7.3.3 OSD settings
Info Bar Select the duration time for displaying the info bar on screen 5, 10, 15, 20
seconds. Also you can select No timeout to keep the info bar continuously.
Transparency Select the level of transparency of menus on top of the live screen.
7.3.4 Parental Control
Parental Rating Select the age rating for which the PIN code shall be entered before watching
a parental rating protected channel. Select All to disable.
Channel Manager The channel manager menu is protected by the PIN code as default to
prevent that your channel list(s) are changed or even deleted by others.
Select Off if you want to disable this function.
7.3.5 Data Base Management
This menu allows you to make a backup or load a previously made channel list to a USB device.
Insert a USB stick into one of the free USB slots.
Backup Backup the current channel list to a USB device.
Load Load previously made channel lists. The current one will be overwritten.
Note You can make more lists as backup and load them later by selecting them
by date(s).
7.3.6 PVR settings (Personal Video Recording)
This menu allows you to setup settings for Timeshift and recordings to a USB device.
Insert a USB HDD into one of the free USB slots. Alternatively, you can use USB sticks but it must be
high speed and high capacity for recording of HD content.
Storage Select the USB device you like to use for the recording function.
Recording Duration The recording time is set to 3 hours as default. For changing this time, select
your default recording time. When you start a recording by pressing 4 you
change this default time to another. The next recording will show this default
time.
Timeshift Default Timeshift time is set to No limitation. This means that during Timeshift
the data keeps writing to the USB device until you press 3. For limiting the
size of data to prevent that the whole space on your connected USB device is
used you can select your maximum write time.
Auto Timeshift Select On to activate Timeshift automatically after you switch to a channel.
If you switch to another channel, then Timeshift will be available from the
beginning until you switch again to another channel. Select Off to deactivate
this function.
7.3.7 System
This menu allows you to see the currently used software version of the DTV part and restore back to
the factory defaults.
18
To Next Page
Loading...
