To Next PageTo Next PageWhat to do if my Strong SRT 2402 Receiver cannot turn on?
If your Strong Receiver isn't turning on, the power adapter might not be correctly connected. Make sure the power connector is completely plugged into the DC socket of the receiver and that the adapter is connected to a 230 V outlet or 12 V plug.
Why is my Strong SRT 2402 Receiver remote control not working?
If the remote control for your Strong Receiver is not working, the batteries may be exhausted. Try changing the batteries.
General| Type | Satellite Receiver |
|---|---|
| Tuner | DVB-S2 |
| LNB Power | 13/18V |
| DiSEqC | 1.0/1.1/1.2 |
| Front connections | USB |
| Video resolution | 576i, 576p, 720p, 1080i, 1080p |
| Input Frequency Range | 950-2150 MHz |
| Output Resolution | 576i, 576p, 720p, 1080i, 1080p |
| Ethernet | Yes |
| Power Supply | AC 100-240V, 50/60Hz |
| TV System | PAL/NTSC |
| Rear connections | HDMI, Ethernet |
| Aspect ratio | 4:3, 16:9 |
| Audio decoding | MPEG-1, MPEG-2 |
| Symbol Rate | 1-45 MS/s |
| Video Decoder | MPEG-2, MPEG-4 |
| Audio Decoder | MPEG-1 Layer 1/2 |
| Connectivity | Ethernet |
