NOTE: Over time, channels can be moved to other frequencies, completely
disappear and new channels can appear. Please add these manually if you
miss them or check our website www.strong.tv for latest updates.
After the above steps have been made the receiver will go into viewing mode and you can use and enjoy
it.
Should some steps not be set as you wish or if you like to restart the wizard, you can do so from the DTV
part. Please press and select DTV settings and conrm with OK to enter.
To reset DTV part to default settings, select System and Factory Reset. After entering the PIN code, the unit
is set back to default and all previous channels and settings will be deleted. The unit will return to the rst
installation wizard of DTV.
NOTE: The Android part is kept as it is and will not be restored to default. Restoring
Android to default can be done in the Android system settings menu itself
and it will reset everything, including DTV.
5.0 HOW TO USE THE ANDROID PLATFORM
After turning on your receiver, Home opens. The app icons you keep in the tray remain visible on every
Home screen. All app icons in the centre are permanent. Press to see all your apps and widgets. The
middle of your Home screen can hold app and widget icons as well as folders. To open an app, folder or
widget, click on its icon.
5.1 Connect to Wi-Fi networks
To fully use the Android platform, you rst need to setup connection to the Internet. If you missed this
setup in Step 4 of the First Installation Wizard you can setup this connection by selecting Settings from the
Home screen and press OK. Select Network and press OK again. In this menu you can choose if you want
to connect via Wi-Fi or LAN (cable). Enter and store your passwords or other network parameters here.
Passwords and IP settings are provided by your Internet provider (or in-house router). A message appears
to inform about a successfully made setup. Press until you return to the Home screen.
When all settings have been installed, select Browser and press OK to access the Internet.
Turn your Wi-Fi on and connect it to a Wi-Fi network
If a wireless network has been added during the rst time installation, Wi-Fi is turned on automatically.
1. Click the settings icon Setting on the Home or All Apps screen.
2. Click the icon Network and then choose Wi-Fi.
3. Slide the Wi-Fi switch to the On position. The device scans for available Wi-Fi networks and
displays the names of those it nds. Secured networks are indicated with . If the device nds a
network that you have connected to previously, it connects to it.
4. Click a network name to see more details or connect to it. If the network is secured, you will be
prompted to enter a password or other credentials. (Ask your network administrator for details.)
To modify the settings of a network, click and hold the network name.
11
English
To Next Page
Loading...
