Need help?Do you have a question about the Strong SRT 5437 and is the answer not in the manual?
General| Type | Satellite Receiver |
|---|---|
| Tuner Type | DVB-S2 |
| Input Frequency Range | 950-2150 MHz |
| Power Supply | 12V DC |
| Aspect Ratio | 4:3, 16:9 |
| Input Connector | F-type |
| Video Output | CVBS |
| Audio Output | HDMI, RCA |
| Supported Resolutions | 576i |
| Connectivity | USB |
| Audio Decoding | MPEG, AAC |
| LNB Power | 13/18V |
| DiSEqC Version | 1.0 |
| Symbol Rate | 1-45 MS/s |
| Video Decoding | MPEG-2 |
Covers essential safety advice for operating the receiver, including power, liquid, ventilation, and cleaning.
Identifies and describes the connections and controls on the front and rear panels of the receiver.
Instructions for connecting the receiver to a TV and other devices using various cables.
Covers channel editing, EPG usage, sorting, and creating favourite channel lists.
Adjusting aspect ratio, display mode, and TV type for optimal video output.
Guidance for resolving common operational problems like no display, no picture, and poor quality.
To Next Page
