Strong SRT 5437 - Clock and Time Settings

18
Note: Time Shift will only be available when USB HDD is connected
to the system and read/ write speed is high enough to do that.
(e) Playback a recorded le: (USB Button)
• Press the USB button from the remote control.
• Select the le from the list, press OK.
(f) Stop the playback:
• Press the white square button on the remote (above the Green
button).
(g) Delete a recorded le:
• Select the le from the list and press RED Button (Audio) on
the remote.
• From the list, select Delete option.
• Select the le and press OK button.
• Then press EXIT button and select Yes.
5. Clock / Time Settings (Menu > Time/Timer
Manager> Time Settings)
• To select Region, Time Zone & Daylight Savings.
Note: Day and Date are automatically collected via the Broadcast
stream (by Default).