EasyManuals Logo

Strong SRT 2221 User Manual

Strong SRT 2221
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
if you are returning it under warranty conditions, make sure to repack the receiver in its original
packaging with its accessories. Failing to comply with such packaging procedures could damage the
product and void your warranty.
1.3 Equipment Set-up
We recommend you to consult a professional installer to set up your antenna equipment. Otherwise,
please follow the instructions below:
Use a high quality, well shielded coaxial cable to receive antenna signals in highest levels
Use a high quality, well shielded HDMI cable to watch also in highest screen resolutions.
Refer to the user manual of your TV and antenna how to connect the HDMI cable.
This user manual provides complete instructions for installing and using this receiver. The symbols
will serve as follows:
Warning Indicates warning information.
Tips Indicates any other additional important or helpful information.
MENU Represents a button on the remote control or the receiver. (Bold characters)
Move to Represents a menu item within a window. Italic characters
1.4 Accessories
Quick Installation Guide
1 Remote control
1 USB adapter for the remote control
2x batteries (AAA type)
HDMI cable
Power adapter
Warning The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
1.5 Usage of external USB devices
It is recommended to use USB 2.0 storage devices or higher. If your device is not compatible
to USB 2.0 specifications, recording, playback and other multimedia functions of the receiver
might not work properly.
STRONG cannot guarantee compatibility with all types of USB devices such as web cams,
keyboards, mouse devices, storage devices.
STRONG cannot guarantee perfect operation when a HDD and a web cam are used at the same
time.
If you are going to use external USB HDDs (Hard Disk Drives), please consider that power
specifications may exceed the supported output of your receiver (max. 5 V/500 mA). If so,
please connect your USB HDD to an external power adapter.
It is advised not to store important information on USB storage devices used with the receiver.
Always make backups of data on your USB storage device before using it with this receiver.
STRONG will not take responsibility for any loss of information or circumstances caused by loss
of information.
4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Strong SRT 2221 and is the answer not in the manual?

Strong SRT 2221 Specifications

General IconGeneral
BrandStrong
ModelSRT 2221
CategoryReceiver
LanguageEnglish

Related product manuals