Strong SRT 32HC2003 - Lock

Clock The time is automatically obtained from the channel transmission and
doesn't have to be set manually.
Time Zone Press p q t u to select Time Zone if you like to change to other zone.
Sleep Timer Press p q to select Sleep Timer. Available Options: Off, 10 min., 20
min., 30 min., 60 min., 90min., 120 min.,180 min. and 240 min..
Auto Standby This function allows you to set the automatic shutdown of your TV.
Choose between 3H, 4H, 5H or Off to disable this function.
OSD Timer This function allows you to choose how long the channellist banner is
displayed. Choose between 5s, 15s or 30s.
5.6 Lock
Press MENU to display the main menu. Press t u to enter the Lock menu settings. To enable
enter the PIN code (default:0000). Press p q to select the options. The following options are
available:
System Lock This option allows you to enable or disable the password protection.
Press ENTER then Pin code to set this function On or Off.
Set Password The default password is 0000, to customize the password press ENTER
and follow the instruction within the menu.
Channel Lock This option allows you to prevent viewing of one or more channels.
Press ENTER to display the channel list and select with pq the
channel you want to be locked. Press GREEN to lock it. Consider the
same procedure to lock other channels if needed.
Parental Guidance Press ENTER to enter and set the age for suitable programmes for
children, then press pq.
Key Lock This option allows you to Lock the TV buttons. Press tu to select Off
or On to lock.
Hotel Mode Press pq to set Hotel mode. Confirm with ENTER. It is possible to
enable or disable this function by setting On or Off using tu or
ENTER.
NOTE: When Hotel Mode is available, the TV react following the settings
enabled of disabled contained in the menu
Options contained in the HOTEL MODE menu:
Hotel Mode To enable or disable this function by setting On or Off using tu or
ENTER.
Source Lock This option allow to enable or disable the sources available: Satellite,
DTV, AT V, AV, PC, SCART, Component, HDMI and Media. Press ENTER to
access the source list and pq to select the sources. Press ENTER to
enable or disable one or more. Please note that it is necessary to keep
more than 1 source un-Locked. Press MENU to back to the previous
menu.
Default Source Here is possible to select the source that will be displayed every time
that the TV is turned on. Press ENTER to access the sources list, and
12
www.strong.tv