2.0 INSTALLATION
2.1 Default PIN code: 0000
2.2 Front panel/underside
Fig.2
NOTE: The graphics are for representation only.
1. Power indicator /remote sensor
2. Speakers
3. Buttons: Input source, Menu, V-/V+, CH-/CH+, Standby/ON.
2.3 Rear Panel
NOTE: The graphics are for representation only.
Fig.3
1. SCART Connect devices like DVD or VCR using SCART cable
2. SAT IN Connect a satellite dish to the TV for searching programmes.
3. ANT/CABLE IN Connect a terrestrial antenna or cable connection from your provider
to the TV for searching programmes.
4. S/PDIF (coax. output)
Use an RCA cable to connect your TV to a compatible digital amplifier
or Home theatre set.
5. COMMONINTERFACE (CI)
Connect a Conditional Access Module (CAM).
6. HDMI 1 Connect HDMI input signal from a signal source such as DVD, Blu-ray
player or game console.
7. HDMI 2 Connect HDMI input signal from a signal source such as DVD, Blu-ray
player or game console.
8. USB Connect a USB device for playback of multimedia files
9. Mini AV IN To connect your video camera or other device using 3.5 mm AV cable to
your TV to play videos on your TV screen
10. Mini YPbPr Connect YPbPr sources.
11. HEADPHONE Speakers will be muted when earphone is plugged in and headphone
selected.
2.4 Remote control
Fig.4
1. q Press to turn the TV on or standby.
2. ! Press to mute or restore the volume.
3. DTV Press to go back to Digital TV.
4. (ASPECT)
Change aspect ratio.
5. (PICTURE) PIC Change picture mode.
5
English
www.strong.tv
To Next Page
Loading...
Need help?
General
