3231
7) Add Channels
This Submenu allows you to add channels.
Press on Add Channels. The following menu will be displayed. <Figure 6.3.8>
Select Frequency.
6.3 Channels
<Figure 6.3.8>
Press / to Change the parameter.
Press to display Keypad pop-up; Edit a channels name.
Select among TV / RADIO.
You can add specific channel of the transponder by setting its PID data (Video, Audio and PCR).
Select the video type (MPEG1/2, H.264).
Select the video type (MPEG1/2, HE-AAC, Dolby Digital(AC3), MPEG4, ACC,
Dolby Digital+(DD+)).
6.4 Electronic Program Guide
1) EPG
⊹
An EPG (Electronic Program Guide) is an on screen list displaying scheduling
information for current and upcoming programming from broadcasters for next 7 days.
EPG data will only be available if the channel provider is broadcasting the EPG information.
⊺
To access the EPG press the button, the list of channels will be displayed in the
left window and the programming information for the selected channel will be
displayed in the right window
Use the or arrow buttons to select the desired channel. Press the arrow
button to access the programming information for the desired channel
⊼
By selecting the desired program, detailed program information will be displayed in
the top pane of the EPG screen
⊽
To Record a selected program press the button (Refer to the ‘How To Record on
your STRONG SRT 4930L Digital Video Recorder section for recording instructions via
the EPG
⊾
To Reserve a program for viewing, select the program by pressing the button. This
will highlight the program. You receiver will now automatically display this program
when it begins even if you are watching another channel
<Figure 6.4.1> <Figure 6.4.2>
<Figure 6.4.3> <Figure 6.4.4>
⊻
You can change the EPG mode by pressing the button. By pressing Info the EPG
mode will change from single channel display. Please note single channel display is the
⊿
default setting.
- Frequency :
- Channel Name :
- Channel Type :
- Video Type :
-
- Audio Type :
To Next Page
Loading...
Need help?
General
