6.8 DVR
or a previously recorded program via one transponder.
6.7 System Information
Your receiver displays current information <Figure 6.7.1> regarding model name, software
version and date of manufacture. This info is useful when downloading new software.
Please note if you have performed a software update you must also perform a factory
reset of the receiver. Please see Database Reset section in the Systems settings menu for
instruction on page 23.
<Figure 6.7.1>
The SRT4930L allows you to record 3 channels simultaneously while watching a 4th
There are 4 ways to record TV programs on your STRONG SRT 4930L:
4645
1) Record on your STRONG SRT 4930L Digital Video Recorder using an external
HDD via USB
Ү
You can expand the storage capacity of your STRONG SRT 4930L by connecting an
external HDD via the front or rear USB ports
Ү
Before connecting the external HDD you will need to format the drive.
Instructions on how to do this can be found on our website www.strong.com.au
in the FAQ section.
Ү
To record to the external HDD you will need to select it in the Menu. Press the
button and using the and arrow buttons select Media Manager by pressing
button. This will display the Media Manager Menu. Using the and arrow
buttons select Disk Manager and press the button. This will display the Disk
Manager Menu. The first item in the list is Default Disk. To set the default disk to your external
HDD press the or arrow buttons until /USB0 is displayed. This corresponds to your
external HDD. Once you have selected /USB0 press the button, you will be
prompted to save the changes made. Select Yes using the or arrow button
and press the button. The default disk is now set to the external HDD
Ү
You can now perform all the recording options listed above using the external HDD
Ү
To set the default HDD back to the internal drive simply remove the external HDD.
Ү
Should you wish to have the external drive permanantly connected follow the above
instructions to select which HDD to record onto.
To Next Page
Loading...
Need help?
General
