EasyManuals Logo

Strong SRT 4930L User Manual

Strong SRT 4930L
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
43
When installing the unit
2.2 Precautions
Install the unit horizontally. An uneven
installation may cause the unit to be
damaged.
Do not put heavy items such as a TV
set on the unit. That may damage
the unit.
Do not place the unit near water. Do not put water holding items such
as vases on the unit.
Do not install the unit:
Where it is subject to vibrations
Where it is exposed to direct sunlight
Where there is humidity
Where the temperature is too high or too low.
Where there is no ventilation
Moving the unit to a hot area from a
cold one will cause condensation.
Do not operate the unit for one or two
hours or until it has dried completely.
User's manual : 1
User's manual
Remote control : 1
Batteries (AAA type) : 2 Component(Y/Pb/Pr) Cable : 1
RCA Cable : 1
Power Cord : 1
If any of the above-listed
accessories is missing, contact
your sales representative.
The accessories below are included with this receiver:
Points to Check before Use
3.1 Accessories
Your dish should be properly installed and azimuth and elevation must be precisely set up.
This unit supports DiSEqC 1.2 and can work with a compatible antenna positioner.
Ask your dealer for information.
The mains plug is used as the disconnect device.
The disconnect device shall remain readily operable.
3.2 The Satellite dish

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Strong SRT 4930L and is the answer not in the manual?

Strong SRT 4930L Specifications

General IconGeneral
BrandStrong
ModelSRT 4930L
CategoryReceiver
LanguageEnglish

Related product manuals