What to do if my Strong Receiver has no picture?
If your Strong Receiver is not displaying a picture, ensure the antenna cable is properly connected to the receiver, or replace the cable if necessary. Verify that the tuner parameters are set correctly in the Installation menu. Also, check the signal strength and adjust your dish accordingly to ensure it's pointing in the right direction.
What to do if there is no picture or sound on my Strong SRT 7003?
If your Strong Receiver is not showing a picture or sound on your TV, first, make sure your TV is on and set to the correct input. Check all cable connections between the receiver and the TV to ensure they are firmly plugged in. Press the MUTE button to unmute the audio. If the receiver is switched to DVD/VCR input, press the DTV/VCR button. If none of these steps work, check the TV power.
Why is my Strong SRT 7003 Receiver remote control not working?
If your Strong Receiver is not responding to the remote control, ensure the receiver is plugged in and turned on. Aim the handset directly at the IR sensor on the receiver, and make sure nothing is blocking the sensor. Finally, replace the batteries in the remote handset.
How to fix a Strong SRT 7003 when the standby indicator does not light up?
If the standby indicator on your Strong Receiver doesn't light up, check that the mains lead is plugged in and the multipoint connector is switched on. Also, make sure the front panel switch is in the ON position.
To Next Page
General
