To Next PageTo Next Page
Need help?Do you have a question about the Strong SRT 7040 and is the answer not in the manual?
Guidelines for safe operation and handling of the receiver and its components.
Guide to connecting the receiver to a TV using an HDMI cable.
Initial configuration of the satellite dish and antenna settings.
Access point for configuring satellite dish, antenna, and channel scanning.
Guidelines for safe operation and handling of the receiver and its components.
Guide to connecting the receiver to a TV using an HDMI cable.
Initial configuration of the satellite dish and antenna settings.
Access point for configuring satellite dish, antenna, and channel scanning.
General| Ethernet | No |
|---|---|
| Weight | 0.5 kg |
| Video Output | HDMI |
| USB Ports | 1 |
| Input Impedance | 75 Ohm |
| Demodulation | QPSK |
| Video Decoding | MPEG-2, H.264 |
| Aspect Ratio | 4:3, 16:9 |
| Video Resolution | 720p, 1080i |
| Audio Decoding | MPEG-1 Layer I/II |
| Audio Mode | Stereo, Mono |
| Connectors | HDMI, USB, RCA |
| USB | 1 x USB 2.0 |
| Symbol Rate Range | 45 MS/s |
| DiSEqC | 1.0, 1.1, 1.2 |
| USB Port | 1 x USB 2.0 |
