Strong SRT 7040 - Rear Panel; Remote Control

8
2.3 Rear panel
Fig.2
1. SAT IN To connect to the LNB of your satellite dish for reception of satellite broadcast
signal
2. HDMI To connect to the HDMI input of your TV using a good quality HDMI cable
3. TV SCART To connect to TV using a SCART cable
4. Audio L/R To connect to an analogue amplier for stereo audio
5. S/PDIF coaxial To connect to a digital or home cinema audio amplier
6. Power connector The receiver requires a wall adapter, mains voltage input 100~240V AC 50~60Hz
12V, 1.5A DC output. Please check the local power conditions before connecting
the receiver to the mains supply.
2.4 Remote Control
Fig.3
7040