Strong SRT 7040 - 3. CONNECTIONS; 3.1 Basic connection using an HDMI cable

11
3. CONNECTIONS
3.1 Basic connection using an HDMI cable
Fig.6
a. Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good quality
coax cable and suitable ‘F-connector' plugs.
b. Connect one end of a good quality HDMI cable to the HDMI output on your receiver and the other end to
the HDMI input of your TV.
c. Plug the power adapter to a suitable wall outlet.
3.2 Basic connection using a Scart cable
Fig.7
a. Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good quality
coax cable and suitable ‘F-connector' plugs.
b. Connect one end of a good quality Scart cable to the TV SCART connector on your receiver and the other
end to the SCART input of your TV.
c. Plug the power adapter to a suitable wall outlet.
7040
7040