Strong SRT 7040 - Language; TV System; Local Time Setting

25
Press pq to select an option and press u or OK to adjust the setting. Press  several times to exit the
menu. Some menu items can only be entered by entering the password. Default is 0000.
7.3.3 Language
Press MENU and select Option. In this menu you can adjust the Language, First Audio, Second Audio and
Teletext
Select an option and press tu to adjust the setting. Press  to exit the menu.
Language: Select the preferred language for the On Screen Display.
First Audio: Select the rst preferred audio language for watching TV channels. If the
language is not available, the Second Audio language will be used
Second Audio: Select the second preferred audio language for watching TV channels. If
the preferred Second Audio language is also not available, another available
language will be used
Teletext: Select the preferred Teletext letter character set.
7.3.4 TV System
Press MENU, then select TV System. The menu provides options to adjust the video settings. Press pq to
select an option and tu to adjust the setting. Press  to exit the menu.
Video Resolution
If the video does not appear correctly, change the setting. These settings match the most common settings
for HDMI.
480i for NTSC system TV.
480p for NTSC system TV.
576i for PAL system TV.
576p for PAL system TV.
720p_50 or 60: for PAL or NTSC system TV.
1080i_25 or 30 for PAL or NTSC system TV.
1080p_50 or 60 for PAL or NTSC system TV.
NOTE: Some brands of TV's do not support 576p.
Aspect Mode
You can set the display format to available settings Auto, 16:9, 4:3PS, (Pan&Scan) and 4:3LB (Letterbox)
Auto With Auto select the TV connected with HDMI will auto-negotiate the optimal
setting.
16:9 For 16:9 TV screens. All programmes will ll the full screen. Content formatted in
4:3 will be stretched.
4:3 Letterbox 4:3LB (Letterbox)
For 4:3 TV screens. The unit will display all content in its original aspect ratio. Programmes formatted in 16:9
will be presented with black bars on the top and bottom.
4:3 Pan&Scan 4:3PS (Pan&Scan)
For 4:3 TV screens.16:9 content will have the extreme left and right portions cut o and presented full
screen.
Digital Audio Output Select digital audio output mode. Settings aect both S/PDIF and HDMI
outputs.
PCM – audio from any format will be converted to PCM Stereo format
RAW – audio from receiver will be send out in the original format
Using PCM mode is the best option if you do not have a TV or Digital Amplier that are not able to process
Multi audio.
7.3.5 Local Time Setting
Press MENU and select Local Time Setting The menu provides options to adjust the time and date settings.
Press pq to select an option and tu to adjust the setting. Press  to exit the menu.