Strong SRT 7040 - Timer Setting

26
Region Select the region or country in which you live. This will set the time oset from
UTC automatically.
UTC Usage Select By Region (the Region selection is valid), User Dene (You may select your
UTC Oset yourself) or O (Time and Date setting are free to adapt.) However,
the default By Region setting and the correct Region setting are usually
sucient. In case the Daylight Saving Time should not be delivered by the
broadcaster, you can adapt it here.
UTC Oset : Select the correct Time Zone in which you live.
Summer Time You may adapt On or O for Daylight Saving Time, should it not be delivered by
the broadcaster.
Date: Enter the date when UTC Usage is set to O.
Time: Enter the time when UTC Usage is set to {O.
7.3.5.1 Timer Setting
In this menu you can setup the schedule for automatic switching to the dened channels at a particular
date/time.
Timers can be set directly from the EPG window or manually from this screen. Not set timers will be default
O
To enter a new timer manually, select an O marked timer in the list and press OK.
Timer Mode Select Once for a onetime event, select Daily for each day, same time event. A
free timer is default O.
Timer Service Select Channel to wake up the receiver to view the channel.
Wakeup Channel Select the channel for this event. Use tu or OK for a pull down list to select.
Wakeup Date Select the date for the event.
On Time Enter the time to start the event.
Duration Enter the length of the event.
After all settings have been made, select Save to store the settings. Select Cancel to discard the settings.
To edit an already existing timer entry, select the entry in the list and press OK, then select and edit the item
which you wish to change.
To delete an already existing timer entry, select the entry in the list and press OK, then select and set Timer
Mode to O and select Save to store.
Exit the screens with .
Parental Lock Set the age limit for a viewer if the viewer is underage. These only functions if a
broadcaster sends an age-signalling for the current programme. You can only
enter the Parental Lock menu by entering your password. The default password
0000
Menu Lock Select either On or O. When On many menu items can only be accessed after
entering the password.
Channel Lock Set to O, channels selected as Lock in the Edit Channel menu, are all accessible
without entering the password. When selected On, these channels are blocked
and need the password to be entered.
New Password To change the default password from 0000 to another password like you wish,
select this option. Enter the new password.
Conrm Password Re-enter your new password to conrm.
Make a note o the new password.
OSD Setting OSD means On Screen Display, all the graphics you will see on screen.
OSD Timeout Set the time (in seconds) the program banner will be shown on screen, when
switching channels.