Strong SRT 8900 - Quick installation

9
EN
Quick installation
For a quick installation, please follow the steps below:
1. Checkwhetheryourset-topboxisconnectedasshowninFigure1and2(page6 and following).
2. Press the
key on your remote to switch on your set.
After a few seconds, a list of menu languages displays on screen.
3. Select your preferred language using the s/t buttons and press OK.
Two installation modes are available:
- quick installation
- advanced installation
 Ifyourset-topboxisconnectedtoapoweredactiveantenna,selectDCpowerONotherwiseletthis
menu item set to OFF.
Note: The DC power setting may also be changed in MENU/Set up/Options.
4. Select Quick installation using the s/t buttons and press OK.
The TV and radio channel search starts automatically.
Advice: a progress bar keeps you up-to-date on how far the channel search is.
5. Wait until the channel scan is finished and press OK.
You are now watching TV in digital quality!
 Tolearnhowusingmainfunctionalitiesofyourset-topbox(changingchannels,usingthemenusect..),
pleasereadthenextchapteronEveryday use!