Strong SRT 8900 - Conax CA; Change CA PIN

17
EN
Conax CA
TheConaxmenuallowsgettinginformationonyouractualsubscription,availabletokensandchanging
the maturity rating.
• TheSubscription status menu informs on rights period on each general channel.
• TheEvent status menu lists all PPV purchased programmes.
• TheToken status menu informs on tokens of each available purse, including their debit and credit
information to each programme that need to use token to be consumed.
Change CA PIN
This sub-menu allows changing the CA PIN code.
Important: The CA PIN code is different from the decoder PIN. The default number is also 1234. It is highly
recommended that you change this number.
Access to Change CA PIN
1. Press the MENU key.
2. Using the s and t keys, select Conax CA then press OK.
3. Using the s and t keys, select Change CA PIN then press OK.
4. Enter the old PIN using the numerical buttons.
5. Enter the new PIN using the numerical buttons.
6. Finally, confirm the new PIN by entering it again.
Note: To Change the decoder PIN, see page 15.
Maturity rating
This sub-menu allows viewing and changing the current maturity rating. Four categories of maturity
rating are defined:
• Gforgeneralaudience
• PGforparentalguidance
• Aforover18
• Xforerotic
G has the lowest maturity rating.
Access to Maturity rating
1. Press the MENU key.
2. Using the s and t keys, select Conax CA then press OK.
3. Using the s and t keys, select Maturity rating then press OK.
You can view the current maturity rating applied to your decoder.
Modify the Maturity rating
1. Select MENU/Conax CA/Maturity rating then press OK.
2. Using the C and B key, select your preferred maturating rating.
3. Enter your CA PIN to validate the new setting.
Exit the Conax CA menu
 ToexittheConaxCAmenupresstheMENU key again.