Strong SRT 8900 - Setup; Languages; Decoder PIN; Access to decoder PIN

15
EN
Setup
Languages
Themenu,audioandsubtitlelanguagescanbesetinNorwegian,Swedish,Danish,Finnish,English(ifthe
correspondingtrackexist).
Access to language settings
1. Press the MENU key.
2. Using the s and t keys, select Setup then press OK twice.
Modify a language
1. Using the s and t keys, select the menu, audio or subtitle language.
2. Press the C and B key to confirm a language.
Exit the language settings menu
 Toexitthelanguagesettingsmenupressthe MENU key again.
Decoder PIN
The Decoder PIN sub-menu allows changing PIN code and lock/unlock the decoder.
Access to decoder PIN
1. Press the MENU key.
2. Using the s and t keys, select Setup then press OK.
3. Using the s and t keys, select Decoder PIN then press OK.
A PIN code protects the access. Enter your 4-digit PIN code.
Change decoder PIN code
 Certainfeaturesoftheset-topbox(e.g.decoderlock)requiretheentryofaPersonalIdentication
Number(PIN).Thedefaultnumberforthisis1234.Itishighlyrecommendedthatyouchangethis
number.
Important - Keep your PIN secret, but don’t lose it!
1. Select Change PIN code and press OK.
2. Enter the new PIN using the numerical buttons.
3. Finally, confirm the new PIN by entering it again.
Note: To change the CA PIN, see page 17.
Lock decoder
1. Select MENU/Decoder PIN.
2. Enter the current PIN using the numerical buttons.
3. Move focus on Decoder lock.
Use the C and B keystoenable/disablethechannelslock(unlock)function.
 NowlockedchannelsintheChannelorganizerareactivated/desactivated.
Exit the Decoder PIN menu
 ToexittheDecoderPINmenupressthe MENU key again.