Strong SRT 8900 - Channel list; Access to the list of channels

13
EN
Channel list
This menu gives access to all lists of channels: the All TV list and your favourite lists. You can view list
content and modify the currently viewed list.
Access to the list of channels
1. Press the MENU key.
2. Using the s and t keys, select Channel list then press OK.
Advice: For a direct access to the Channel list, press the LIST key on your remote.
View list content
To view the content of a list, highlight it using the s and t keys and press the OK key.
To navigate through the channel list, use the s and t keys.
To switch to a channel you want to watch, highlight the channel using the s and t keys and press the
OK key The list will automatically be set as current.
To scroll one page down/up in the channel list, use the P+/P- keys.
Set a list as current
To set a list as current, highlight the list using the s and t keys and press INFO.
Note: The focus is automatically set on the currently viewed list.
Exit the Channel list
 Toexitthesub-menulistofchannels,pressthe LIST key again.
Channel list update
Duringtherstinstallation,theset-topboxsearchesforchannelsinthenetwork.Iflaternewchannels
aremadeavailableorarerenamed,suppressedorchanged,theset-topboxwillautomaticallyupdatethe
All Channels list.