Strong SRT 8900 - EPG

11
EN
To display the zapping banner:
1. Press the INFO key once.
Advice: a basic zapping banner is automatically displayed when you tune to another channel. To change the
display duration of the zapping banner go in MENU/Setup/Options and select Banner time out.
To display the information banner:
2. Press the INFO key again.
Advice: to display information on the next programme on the selected channel, press the t arrow key.
To escape the zapping/information banner:
3. Press the INFO key a third time or the EXIT key once.
Using the Mini-Guide
Thanks to the Mini-Guideyoucanviewwhat’sonotherchannelswithoutchangingchannel.
To use the mini-guide:
1. Press the INFO key once.
Check that the highlight is set on Mini-Guide. Else, select it using the s/t buttons.
2. Press the B/Carrowkeysforavirtualzappinginthecurrentlistofchannels.
Informationisgivenonthecurrentandnextprogrammeoftheselectedchannel.
Advice: to switch to a current programme on another channel, select the channel and press the OK key.
EPG
TheElectronicProgrammeGuide(EPG)allowsyoutoviewwhat’sonallchannelsupto7daysinadvance
and to programme a timer.
To use the guide:
Press the GUIDE key once.
To navigate through the channel list, use the s and t keys.
To navigate through time slots, use the C and B keys.
To switch to a current programme broadcasted on another channel, highlight the programme using
the arrow keys and press OK.
To set a timer to a programme that will be broadcasted later on, highlight the programme using the
arrow keys and press OK.
To scroll pages up/down in the list, use the P+/P- keys.
To get more information about a programme, highlight it and press the INFO key.
To escape the guide:
 ToexittheEPG,presstheGUIDE key again.