Table of Contents
1 About this manual 5
2 Safety 5
2.1 Intended use 5
2.2 LaboForce-100safety precautions 5
2.2.1 Read carefully before use 5
2.3 Safety messages 6
2.4 Safety messages in this manual 7
3 Getting started 8
3.1 Device description 8
3.2 LaboForce-100 8
4 Transport and storage 9
4.1 Long-term storage or shipping 9
5 Installation 9
5.1 Unpacking 9
5.2 Checking the packing list 9
5.3 Installation - LaboForce-100 10
5.4 Electrical connection to the machine 10
5.5 Compressed-air connections 11
5.6 The specimen mover 11
5.6.1 Inserting a specimen holder 11
5.6.2 Inserting a specimen mover plate 12
5.6.3 Adjusting the height of the specimen mover plate 12
5.6.4
Adjusting the horizontal position of the specimen holder or specimen
mover plate 14
5.6.5 Completing the adjustment 15
5.7 The flexible specimen holder 15
5.7.1 Inserting a flexible specimen holder 17
5.7.2 Adjusting the height of the flexible specimen holder 17
5.7.3 Adjusting the horizontal position of the flexible specimen holder 19
5.8 LaboDoser-100 with LaboForce-100 19
5.9 LaboDoser-10 with LaboForce-100 19
5.10 Noise and vibration levels 19
6 Operating the device 20
6.1 Control panel functions 20
LaboForce-100 3
To Next Page
Loading...