Stryker Endoscopy 1088 - Using the W Button; Using the up and down Buttons

24
Using the W Button
The W button activates the white-balance function or the light/zoom
function.
• Press the W button for more than one second to activate the
white-balance function. (The white-balance function may also
be initiated using the WHITE BALANCE switch on the front
console panel. See the “Using the White Balance Switch”
section of this manual for details.)
• Press the W button for less than one second to increase the
light or zoom. Each press will raise the light or zoom level one
out of four total increments. When the light or zoom level has
reached its maximum level, pressing the W button again will
cycle the level back to the lowest setting.
Note Whether the button selects light or zoom depends on which
function has been selected with the LIGHT/ZOOM switch
on the rear console panel. (See the “Using the LIGHT/
ZOOM Switch” section of this manual for details.)
Using the Up and Down Buttons
The up and down buttons work together to increase or decrease the light
level or zoom settings. Whether the button selects light or zoom depends
on which function has been selected with the LIGHT/ZOOM switch on the
rear console panel. (See the “Using the LIGHT/ZOOM Switch” section of
this manual for details.)
• ZOOM: When ZOOM is selected on the rear console panel,
pressing the arrow buttons will raise or lower the magnification
setting between 100 percent and 200 percent in 64 steps.
Press the button once for individual steps or hold down the
button for a quicker, smoother transition.
• LIGHT: When LIGHT is selected on the rear console panel,
pressing the arrow buttons will raise or lower the automatic-
shutter light-level setting in 64 steps. Press the button once for
individual steps or hold down the button for a quicker, smoother
transition.